Updating The Software (Required After A Recovery) - Keysight M9384B Startup Manual

Updating the Software (required after a recovery)

To install the latest software version, the software and installation instructions are
available at:
www.keysight.com/find/M9384B
Step
1. Log out of the default user (instrument):
2. At the log in prompt, enter:
3. Follow the instructions on the software update web page.
M9384B Startup Guide
Additional recovery steps may be required to fully recover the
system to a more current working state. This could involve
restoring your own backups of the instrument information or re-
installing applications, data and performing system
customizations.
Click Start . Select Change account settings
User Name: administrator
Password: Keysight4u!
When the message Programming FPGAs...Do NOT turn
off power to the instrument is displayed, be sure to
do as it says and DO NOT turn off the instrument power at this
time for ANY reason. If this process is interrupted, the
instrument most likely needs to be sent back to an Keysight
Service Center for servicing before it is usable again.
Step 3: Prepare and Power up the Signal Generator
Installing the Software
Disk Drive Recovery Process
> Sign out.
41