Operation - Greenlee CM-1050 Instruction Manual

Operation

Electric shock hazard:
Contact with live circuits can result in severe injury or death.
1. Set the selector according to the Settings Table.
Settings Table
To measure set the selector
this value ... to this symbol ...
Continuity*
Current (AC)
Resistance
Voltage (AC)
Voltage (DC)
* Tone indicates a circuit resistance is less than 100 .
2. See Typical Measurements for illustrations of typical uses.
3. Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit, replace the
battery.
• If the unit still does not function as expected, send the unit to Greenlee for repair.
4. Take the reading from the circuit to be tested.
Note: Press HOLD to hold the present value on the display.
connect the
red lead to ...
V
A N/A
V
V V
V V
CM-1050
and connect the
black lead to ...
COM
N/A
COM
COM
COM
9