Olivetti d-COPIA5001MF Operation Manual page 568

Troubleshooting > Troubleshooting
Message
Staple jam.
System error.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-77)
T
Message
The cover is open.
The device cannot be
connected because
allowed connections
would be exceeded.
The folding unit is
open.
The password does
not meet password
policy.
The phone receiver is
off the hook.
The slit glass requires
cleaning.
The toner container is
improperly installed.
This ID card is already
registered to another
user.
Checkpoints
—
—
Checkpoints
Is there any cover which is
open?
Are three handheld devices
connected simultaneously?
―
Is the password expired?
Is the password policy
requirement (such as password
length or required characters)
changed?
―
—
—
—
10-47
Corrective Actions
If a staple jam occurs, the
machine will stop and the
location of the jam will be
indicated on the screen. Leave
the machine on and follow the
instructions to remove the
jammed staple.
System error has occurred.
Follow the instructions on the
screen.
Corrective Actions
Close the cover indicated on the
screen.
Cancel a connection to a
portable device that is not being
used, or set the machine's auto
disconnect time to break
portable device connections.
Close the folding unit.
Change the login password.
The job is canceled. Select
[End].
Confirm the password policy
requirements and change the
login password.
The job is canceled. Select
[End].
Put down the receiver.
Clean the slit glass using the
cleaning cloth supplied with the
document processor.
The toner container is
improperly installed or not
installed.
Open the front cover and set the
toner container correctly.
Your ID card has already been
registered. Change it to another
ID card.
Reference
Page
page 10-
119
—
Reference
Page
―
page 8-51
―
page 9-7
page 9-8
page 9-7
page 9-8
―
page 10-3
—
—