Olivetti d-COPIA5001MF Operation Manual page 491

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Configuring Guest Property
Register guest user information and functions that are restricted.
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name
d-COPIA 5001MF
d-COPIA 6001MF
2
"User Login Setting" [Next] > "Guest Authorization Set." [Next] > "Guest Property" [Next]
Configure the settings.
Check the settings and change or add information as needed.
Item
Enter the name displayed on the user list (up to 32 characters).
User Name
The default setting is "Guest User".
The authority of the user appears. This cannot be changed.
Access Level
Add an account where the user belongs.
Account Name
If the user does not belong to any account, select [Others].
Login User Name
5000
6000
Descriptions
9-23
Login Password
5000
6000