Olivetti d-COPIA5001MF Operation Manual page 462

Setup and Registration (System Menu) > System Menu
Item
Auto Panel Reset
Auto Error Clear
Low Power Timer
Panel Reset Timer
Sleep Timer
Interrupt Clear Timer
Error Job Skip
If no jobs are run for a certain period of time, automatically reset settings and return to
the default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
For setting the time until the panel is automatically reset, refer to the following:
Panel Reset Timer (page 8-77)
If an error occurs during processing, processing stops to wait for the next step to be
taken by the user. In the Auto Error Clear mode, automatically clear the error after a
set amount of time elapses.
Value: Off, On
NOTE
For setting the automatic error recovery time, refer to the following:
Error Clear Timer (page 8-78)
Set amount of time before entering the Low Power mode.
Value
For Europe: 1 to 120 minutes (1 minute increments)
Except for Europe: 1 to 240 minutes (1 minute increments)
Low Power Mode (page 2-40)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel
Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
Set amount of time before entering Sleep.
Value
For Europe
1 to 120 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
Set the period after which the machine reverts to Normal mode when it has been set
to Interrupt Copy mode and then left unused.
Value: 5 to 495 seconds (in 5 second increments)
Set whether a job for which a "Add paper in cassette #" or "Add paper in Multipurpose
tray" error occurred when the job was started is automatically skipped after a set period
of time elapses.
Value: Off, On
NOTE
• When a job is skipped, it is moved to the end of the job queue.
• If [On] is selected, set the time until the job is skipped. The setting range is 5 to 90
(5 second increments).
8-77
Description