Safety Information - Greenlee 93-604 Instruction Manual

SAFETY INFORMATION

• Do not use the meter if it is wet or damaged. Electric shock can
result.
• Do not apply more than 500 VAC/VDC between any terminal and
earth ground. Electric shock can result.
• Do not attempt to measure more than 750 VAC or 1000 VDC. Electric
shock can result.
• Do not measure current in circuits with more than 250 VAC/VDC or
in circuits which have a maximum load exceeding 4000 VA and fuse
protection greater than 16 amps. Electric shock can result.
• Do not connect the meter to a source of voltage or current when the
range selector is in an
can result.
• Do not use for IEC 664 Overload Range III installations. Electric
shock can result.
Failure to observe these warnings may result in serious injury or death.
4
Electric shock hazard:
Contact with live circuits can result in severe
injury or death.
or the position. Electric shock