Maintenance; Replacing The Battery Or Fuse; Maintenance Replacing The Battery Or Fuse - Greenlee 93-604 Instruction Manual

93-604 Multimeter

MAINTENANCE

Replacing the Battery or Fuse (See Figure 2)
1. Disconnect the test leads from the circuit under test and set the range selector to OFF.
Remove the test leads from the meter.
2. Remove the protective boot from the meter.
3. Remove three (3) screws from the case back. Slide the case back off of the meter.
4. Remove and replace the battery or fuse(s) as necessary.
5. Replace case back and reinstall three (3) screws. Do not overtighten.
Fuses
Battery
Fig. 2
19