Procedure For Creating I/O Tables - Omron SYSMAC CS1W-ETN21 Operation Manual

Creating I/O Tables
Connecting Programming
Devices
2-6-3

Procedure for Creating I/O Tables

Note
40
To connect a Programming Console, attach a CS/CJ-series Key Sheet and
then connect the Console to the CPU Unit's peripheral port. (It cannot be con-
nected to the RS-232C port.)
The procedure for creating I/O tables is shown here, taking as an example I/O
tables that is generated automatically for a PLC connected online. In this
example, a Programming Console is used for creating the I/O tables. For an
explanation of how to create I/O tables using a CX-Programmer, refer to the
CX-Programmer User's Manual.
Use the following procedure to create the I/O tables.
With the CJ Series, it is necessary to create I/O tables only when I/O alloca-
tion is performed by the user. With the CS Series, it is always necessary to
create I/O tables.
Initial screen
000000 I/O TBL ?
CHG
000000 I/O TBL
WRIT ????
000000CPU BU ST?
0:CLR 1:KEEP
000000 I/O TBL
WRIT OK
CH
SHIFT
*DM
WRITE
Password
(Save or clear the CPU Bus Unit System Setup.)
or
Section 2-6