Receive Mail - Omron SYSMAC CS1W-ETN21 Operation Manual

Receive Mail

3-8 Receive Mail
Posting Mail Address Protection Setting
72
Item
Interval time When "Periodic
timer" is set as
the mail trigger
type
When "Bit value
change" or
"Word value
change" is set
as the mail trig-
ger type
For details, refer to SECTION 2 Mail Send Function in the Operation Manual
Construction of Applications.
Item
Protect by mail If this option is selected, mail from sources
address other than specified addresses is denied.
Use the "Mail address" text box below to spec-
ify the sources from which to receive mail.
Source mail Set the mail address if the option has been
checked to protect using mail address.
Mail will not be accepted from sources other
than the mail address set here.
Contents
Set the time interval for sending
mail.
1 to 1,440 (10 to 14,400 min), in
units of 10 min
Set the time interval for monitor-
ing the value at a specified
address.
1 to 1,000 (1 to 1,000 s), in units
of 1 s
Default: 0000
Contents
Section 3-8
Default
0
(10 minutes)
0
(1 second)
Default
Not checked
None