TP-Link MR5-WR542G User Manual page 39

To add additional entries, repeat steps 1-6.
Note: When 64-bit, or 128-bit, or 152-bit is selected, WEP Key will be enabled.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
Click the Next button to go to the next page and click the Previous button to return to the previous page.
For example: If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE be able to
access the router. The wireless station B with MAC address 00-0A-EB- 00-07-5F not be able to access the
router, and the wireless station C with MAC address 00-0A-EB-00-07-8A be able to access the router
when its WEP key is 2F34D20BE2E 54B326C5476586A, while all other wireless stations cannot access
the router, you should configure the Wireless MAC Address Filtering list by following these steps:
1. Click the Enable button to enable this function.
2. Select the radio button: Deny the stations not specified by any enabled entries in the list to
access for Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE in the MAC Address
field, enter wireless station A in the Description field, select Allow in the Privilege pull-down list
and select Enabled in the Status pull-down list. Click the Save and the Return button.
5. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-5F in the MAC Address
field, enter wireless station B in the Description field, select Deny in the Privilege pull-down list and
select Enabled in the Status pull-down list. Click the Save and the Return button.
6. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-8A in the MAC Address
field, enter wireless station C in the Description field, select 128-bit in the Privilege pull-down list,
enter 2F34D20BE2E54B326C5476586A in the WEP Key field and select Enabled in the Status
pull-down list. Click the Save and the Return button.
The filtering rules that configured should be similar to the following list:
MR5-WR542G 54Mbps Wireless Router User Guide
34