Dalsa P4-CC-04K07T User Manual page 66

66
Ad ju st the ind ep end ent exp osu re control u sing either the GUI or the 3-letter com m and s:
CamExpert GUI
Parameter
Exp osu re Tim e Color Selector
Exp osu re Tim e
Three-Letter Commands
Parameter
scl (Select Exp osu re Tim e Color Selector)
set (Set Exp osu re Tim e)
N ote that the red and green exp osu re tim es m u st be set at least 1 µsec shorter than the blue exposure time.
The above restriction shou ld not to be an issu e for m ost ap p lications, as com m ercial light sou rces
generally ou tp u t less p ow er at the blu e end of the sp ectru m . If the Exp osu re Tim e Color Selector is set to
A ll, this criteria is au tom atically m et.
Further note that the ord er in w hich the exp osu re tim e color selector valu es are entered is im p ortant .
When entering the exp osu re tim es u sing either the GenIcam interface or the three -letter com m and
interface, checks are p erform ed on the entered exp osu re tim es. If a blu e integration tim e is entered that is
shorter than the green or red integration tim e, then an error cond ition w ill be ind icated and the valu e w ill
not be accep ted by the cam era. The sam e is tru e if a red or green integration tim e is entered that is not
sm aller by 1 µsec than the blu e integration tim e.
Be aw are that the above checking is p erform ed on the valu e being entered against the valu es the cam era
cu rrently has set and therefore that the ord er that the valu es are entered is im p ortant. For exam p le, if the
revised blu e valu e is less than the cu rrent blu e valu e, enter the green and red valu es first. If t he new blu e
valu e is greater than the cu rrent blu e valu e, enter the blu e valu e first.
03-032-20180-00
In the Camera Control Set
All, Red , Green, Blu e
In the Camera Control Set
Select 0-ALL, 1-Red , 2-Green, or 3-Blu e.
Execu tes the com m and .
Piranha4 4K Camera Color User's Manual
Value
Value
Teledyne DALSA