Table of Contents
Advertisement
1. Important safety information regarding the placement of this
device is provided on page 101. Please review it before
proceeding.
2. Make sure that the power to all devices connected to the
installation are turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
Rack Mounting
The VM3404H can be mounted in a 19" (1U) system rack and VM3909H can
be mounted in a 19" (2U) system rack.For the most convenient front panel
pushbutton configuration and operation at the local site, mount the unit at the
front of the rack, as follows:
1. Use the M3 x 8 Phillips head hex screws supplied with the Mounting Kit
to screw the rack mounting brackets onto the front and back of the unit.
Phillips Head Hex
M3 x 8
Hardware Setup
Chapter 2
11
Advertisement
Table of Contents
