Advertisement
Quick Links
REG DESIGN NO: 3021428
Installation Safety Notes.....................................................................................................................2
Parts List.............................................................................................................................................4
Disassembly Instructions....................................................................................................................6
Installation Instructions.......................................................................................................................7
Additional Mounting Options.............................................................................................................10
Product Dimensions..........................................................................................................................11
B-Tech Contact Details.....................................................................................................................12
INSTALLATION TOOLS REQUIRED
13mm (1/2") spanner
or socket
B-TECH AUDIO VIDEO MOUNTS
BT7522
FLAT SCREEN WALL MOUNT WITH TILT
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Mount
PLEASE KEEP THIS FOR FUTURE REFERENCE
CONTENTS
Drill
Crosshead
screwdriver
www.btechavmounts.com
FEATURES
● Fits 75 x 75mm, 100 x 100mm and 200 x 100mm
VESA mounting patterns
● Mounts screen only 45mm (1.8") from wall
● Tilts +/-40°
● Simple hook-on installation with all mounting
hardware included
● Supplied with pin hex security screws for
added security
● Compatible with B-Tech accessory collars
10mm (7/16") masonry bit
or 6mm (15/64") wood bit
Pencil
Stud finder
(optional)
Advertisement
Related Manuals for B-Tech mountlogic BT7522
Summary of Contents for B-Tech mountlogic BT7522
-
Page 1: Table Of Contents
● Tilts +/-40° ● Simple hook-on installation with all mounting hardware included ● Supplied with pin hex security screws for added security ● Compatible with B-Tech accessory collars REG DESIGN NO: 3021428 CONTENTS Installation Safety Notes........................2 Parts List.............................4 Disassembly Instructions........................6 Installation Instructions........................7... -
Page 2: Installation Safety Notes
Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference. B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. - Page 3 Niniejszy produkt musi być zamontowany na odpowiedniej powierzchni, a podczas użytkowania nie wolno przekraczać podanego maksymalnego obciążenia. A B-Tech International Ltd. recomenda que a instalação deste produto seja efectuada por um instalador de AV profissional ou outra pessoa devidamente habilitada. A B-Tech International Ltd. e os seus distribuidores e concessionários não são responsáveis por danos ou lesões causados por uma instalação incorrecta.
-
Page 4: Parts List
BT7522 PARTS LIST IMPORTANT This mount must be disassembled prior to installation. Suitable for loads up to 25kg (55lbs) - Page 5 PART NAME WALL PLATE INTERFACE PLATE M8 x 12mm PIN HEX SECURITY SCREW M8 METAL WASHER M8 x 12mm PIN HEX SECURITY SCREW 2.5mm PIN HEX SECURITY KEY (FOR PART A) 5mm PIN HEX SECURITY KEY (FOR PART 3 & 5) INTERFACE KIT M4 x 12mm PIN HEX SECURITY SCREW FIXINGS KIT...
-
Page 6: Disassembly Instructions
DISASSEMBLY INSTRUCTIONS i. Remove parts 3 and 4 from the sides of the mount. ii. Loosen part 5 then lift off the interface plate. iii. Position remaining screws (part 5) as shown. (APPROX) -
Page 7: Installation Instructions
THIS MOUNT MUST BE DISASSEMBLED PRIOR TO INSTALLATION INSTALLATION INSTRUCTIONS Fix wall plate to the wall using one of the following methods. i. Brick / concrete walls. 10mm (7/16") masonry bit ii. Wood / stud walls. 6mm (15/64") wood bit... - Page 8 Attach interface plate to back of the screen. FLAT SCREEN Hook screen onto wall plate. FLAT SCREEN WALL...
- Page 9 Secure in position with parts 3 and 4. WALL FLAT SCREEN Adjust tilt and fix in position using parts 3 and 5. WALL FLAT SCREEN ° +/- 40 * ACTUAL TILT AVAILABLE DEPENDENT ON SCREEN SIZE...
-
Page 10: Additional Mounting Options
ADDITIONAL MOUNTING OPTIONS BT7850 BT7052 This product is compatible with the System 2 range of professional install products from B-Tech Pole Installations ii. Vertical Pole i. Horizontal Pole SAMPLE INSTALLATIONS SAMPLE INSTALLATIONS BT7522 BT7822 BT7260 BT7522 BT7325 BT4011 BT7850 BT7322... -
Page 11: Product Dimensions
78mm 3.1" 108mm 4.3" 24mm 20° 0.9" 78mm 3.1" 125mm 12° 4.9" 40° 170mm 6.7" 175mm 6.9" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT. -
Page 12: B-Tech Contact Details
©2009 Bennett Technologies Limited. All rights reserved. B-Tech Audio Video Mounts is a division of Bennett Technologies Limited. B-Tech, Better By Design, Mountlogic & System 2 are registered trademarks of Bennett Technologies Limited. All other brands and product names are trademarks of their respective owners.