Tenda W303R User Manual page 50

11n wireless

Hide thumbs Also See for W303R:

Table of Contents

remotely. If you want to access the Router from outside of the local network, please click

the checkbox after "Enable".

Enable: Check to enable remote web management.

Port: The management port open to outside access. The default value is 80.

IP Address: Specify the range of the IP addresses of the computers on the Internet

for remote management.

NOTE:

1. If you want to log in the device's Web-based Utility via port 8080, you need to use

the format of WAN IP address: port (for example http：：：： //220.135.211.56:8080) to

implement remote login.

2. If your WAN IP address starts and ends with 0.0.0.0, it means all hosts on the

Internet can implement remote Web management. If you change the Internet IP

address as 218.88.93.33-218.88.93.35, then only the computers at the IP addresses of

218.88.93.33, 218.88.93.34 and 218.88.93.35 can access the Router to implement

remote web management.

For example:

If you want to configure the computer at the IP address of 218.88.93.33 to access the

router's web-based utility via port 8080, please set the parameters as above.

11N Wireless User Guide

Table of Contents