Table of Contents
Advertisement
11N Wireless User Guide
access the server through the default port 21 and adopts TCP protocol.
Please follow the steps below to configure.
1.Enter 21 in both start port and end port fields, or you can also select FTP from the
well-known service port and its port 21 will be added to the corresponding field
automatically.
2. Enter 192.168.0.10 in the LAN IP column, and then select "Both" as the protocol and
select "Enable".
3. As the picture shown below.
4. Click the "Ok" button to save the settings.
And now, when your friends want to visit the FTP server, they only need to enter
ftp://xxx.xxx.xxx.xxx:21 in the address field. Here, xxx.xxx.xxx.xxx means the router's WAN
IP address. For example, when your router's WAN IP address is 172.16.102.89; your
friends need to enter ftp://172.16.102.89:21 in the address field.
NOTE:
If you set the service port of the virtual server as 80, you must set the Web
management port on Remote Web Management screen to be any value except 80
such as 8080. Otherwise, there will be a conflict to disable the virtual server.
37
Advertisement
Table of Contents
