Secondary Unit Interface - SolarEdge SE8K-N4 Installation Manual

Secondary Unit Interface

Figure 10: Connection Unit with MC4 Connectors bottom interface
AC output: cable gland for connection to the grid, M50 20-38mm diameter
l
AC protective earth gland: cable gland for grounding , 9-16 mm diameter
l
Communication gland: for connection of c ommunication options. Refer to Setting Up Communication
l
on page 54.
Secondary Unit Interface
The Secondary units connectors are for connection to the Primary Unit:
l
DC (MC4) connectors: for connection of the PV installation
o
Communication connector: for communication options
o
AC connector: for connection of the AC
o
Mounting hole: for securing the unit to the bracket and for connecting an optional secondary
l
grounding cable.
Grounding screw: for connecting an optional secondary grounding cable.
l
22
Three Phase Inverter with synergy technology Guide MAN-01-00402-1.1
for 1 Secondary Unit (left), for 2 Secondary Units (right)
Figure 11: Connection Unit with glands bottom interface
for 1 Secondary Unit (left), for 2 Secondary Units (right)
Figure 12: Secondary Unit bottom and side interfaces