SolarEdge SE8K-N4 Installation Manual page 27

Mounting and Connecting the Primary and Secondary Unit(s)
10. Connect the C onnection Unit cables to the Secondary Unit(s) connectors.
Communication cable to communication connector
l
DC cables to DC+ and DC- connectors
l
AC cable to AC connector
l
Ensure the white mark on the AC connector, is lined between the arrows on the AC cable.
o
Plug the A C cable into the Secondary Unit.
o
Rotate the cable connector clockwise to fasten it.
o
Figure 16: Connecting the AC connector to a Secondary Unit
NOTE
When connecting the AC cable to the left secondary Unit, loop the cable ( see the following figure) to
prevent pressure on the gland.
26
Three Phase Inverter with synergy technology Guide MAN-01-00402-1.1
Figure 15: Connection Unit bracket