Vision Fitness X6200HRT/DA Owner's Manual page 15

Hide thumbs Also See for X6200HRT/DA:

STEP 3:

One Pedal Arm will now be lower than the other. Simultaneously

lift both the lowest Pedal Arm and the Guide Rail upon which it is resting

to the vertical position (A). The lock pin protruding from the Guide Rail

should now be aligned with the lock receiving mechanism on the

underside of the Pedal Arm. Firmly push the Guide Rail until it clicks and

locks into position (B). Check that it is secure before proceeding.

Repeat these steps with the other Pedal Arm and Guide Rail to completely

fold your Elliptical Trainer for compact storage.

NOTE:

(See Illustration 4) On Dual-Action Elliptical trainers, the higher Pedal

Arm (C) will have the lower Dual-Action Handlebar behind the Pedal Arm,

and the Upper Dual-action Handlebar forward of the Console Mast (D).

X6000da X6200hrt X6000