Hyundai TG1000i Manual page 48

GENERATOR USE
1. Connect the ground terminal
2. Start each engine according to "STARTING THE ENGINE".
When the output indicator light (green) does not light and the overload indicator light (red) lights
instead, set the engine switch to STOP, stop the engine at once and then start the engine again.
3. Confi rm that the equipment to be used is switched off, and insert the plug of the equipment to
be used into the AC receptacle.
CAUTION
■Confi rm that the use equipment to be connected is switched off.
■When the equipment to be used is switched on, it will operate
suddenly, and injuries or accidents may be caused.
ENGLISH
48