Hyundai TG1000i Manual page 52

INTELLIGENT THROTTLE SYSTEM
Intelligent Throttle System
With the switch in the ON position, Engine speed is kept at idle automatically when the electrical
load is disconnected and returns to the proper speed to match the power of the electrical load
when the load is reconnected. This position is recommended to minimize fuel consumption while
in operation. In the OFF position, the Intelligent Throttle system does not operate.
WARNING
■ Intelligent Throttle system does not operate effectively if the electrical appliance requires rapid
cycling power. If the appliance or tool will be turned ON and OFF quickly, the Intelligent Throttle
switch should be in the OFF position.
■ When high electrical loads are connected simultaneously, turn the Intelligent Throttle switch to
the OFF position to reduce voltage fl uctuation or shutdown.
■ Appliances with large start-up power demands may not allow the engine to reach normal
operating rpm when they are connected to the generator. Turn the Intelligent Throttle to the
OFF position and connect the appliance to the generator. If the engine still will not reach
normal operating speed, check that the appliance does not exceed the rated load capacity of
the generator.
■ In DC operation, turn the Intelligent Throttle switch to the OFF position.
ON: Recommended to minimize fuel consumption and further reduce noise levels when no load is
applied to the generator.
OFF: The Intelligent Throttle system does not operate.
ENGLISH
52