Brother DC200 Operation Manual page 18

n
When [DesignNCut connection is successful.]
appears in the dialog box, click [OK].

After completing the network connection, see
"REGISTER DesignNCut ON ScanNCutCanvas"
on page 22 to connect your machine to
ScanNCutCanvas.
■ Using WLAN Assistant Wizard with
USB Cable
Apply wireless LAN setting to DesignNCut machine
with the wizard by temporarily connecting your
machine and your computer with a USB cable*.
* USB cable (sold separately)
• We recommend using a USB 2.0 cable (Type A/B)
of 2.0 m or less.
Note
• The connectors on the USB cable can only be
inserted into a port in one direction. If it is
difficult to insert the cable connector, do not
insert it with force and check the orientation of
the connector.
If you have already selected the
connection method, please go to step
: Operation performed in DesignNCut
Manager
a
Click [Start Setup].
b
Click [Connect].
c
Select [Wireless LAN], and then click [Next].
d
Select [Use WLAN Assistant Wizard (USB)],
and then click [Next].
: Operation performed on the machine
e
Turn off the DesignNCut machine, by pressing
.
f
Press and the
the power comes on release
pressing down .
g
When the message [Machine mode?] appears
on your LCD, press
e
at the same time, once
while still
to select [WLAN].
h
The message, [Turn the machine off, then on
again.] will appear on your LCD.
Follow the machine's instruction.
Once your machine is back on, the text [Standby
(WLAN)] should display on your LCD.
i
Plug the USB cable connector into the
corresponding USB ports on the computer and
on the machine.
a USB port for a computer
b USB cable
Note
• USB Cable is sold separately.
: Operation performed in DesignNCut
Manager
j
Go back to DesignNCut Manager and click
[Wizard].
k
The WLAN Assistant Wizard starts up. Follow
the on-screen instructions to complete the
setup.
Note
• The default settings for Authentication/
Encryption methods are as follows:
Authentication methods: WPA/WPA2-PSK
Encryption Mode: AES
To select the correct method, please check the
wireless security information of your wireless
access point/router.
1
17