Brother DC200 Operation Manual page 17

Note
• To check your machine's number, press
to display the [2. Machine Info] on the
machine's LCD, and then press
When [1. No.] appears on the LCD, press
Your machine's number will be displayed on the
machine's LCD.
p
When [DesignNCut connection is successful.]
appears in the dialog box, click [OK].
* For mobile version, this dialog box will not appear.

After completing the network connection, see
"REGISTER DesignNCut ON ScanNCutCanvas"
on page 22 to connect your machine to
ScanNCutCanvas.
■ Using WLAN Assistant Wizard
Apply wireless LAN settings of your computer to
DesignNCut machine by using the wizard to connect
your computer to WLAN.
If you have already selected the
connection method, please go to step
To perform this setting, your computer's firewall
must be turned off.
: Operation performed in DesignNCut
Manager
a
Click [Start Setup].
b
Click [Connect].
c
Select [Wireless LAN], and then click [Next].
d
Select [Use WLAN Assistant Wizard], and then
click [Next].
: Operation performed on the machine
e
Turn off the DesignNCut machine, by pressing
.
f
Press and the
the power comes on release
pressing down
g
When the message [Machine mode?] appears
on your LCD, press
16
.
e
at the same time, once
while still
.
to select [WLAN].
h
The message, [Turn the machine off, then on
again.] will appear on your LCD.
Follow the machine's instruction.
Once your machine is back on, the text [Standby
(WLAN)] should display on your LCD.
.
: Operation performed in DesignNCut
Manager
i
Go back to DesignNCut Manager and click
[Wizard] and how to use WLAN Assistant
Wizard dialog box appears.
Follow the on-screen instruction to complete
the setup.
: Operation performed on the machine
j
When the message [Connected to WLAN. Press
[OK] button.] appears on your LCD, press
button on your machine.
k
The Wireless LAN Connect light will turn on.
* Give the Wireless LAN Connect light time to turn
on.
: Operation performed in DesignNCut
Manager
l
Go back to your PC and then click [OK] to
complete the setup.
m
Select the machine number and then click
[OK].
Note
• To check your machine's number, press
to display the [2. Machine Info] on the
machine's LCD, and then press
When [1. No.] appears on the LCD, press
Your machine's number will be displayed on the
machine's LCD.
.
.