Brother DC200 Operation Manual page 15

m
Enter your network password (key) using the
or pressing
character. The characters on the DesignNCut
LCD are listed in the order below.
When pressing
0123456789abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
!"#$%&'()*+,-./:;<=>?@[]^_
You must go through each one of these until your
desired character shows up on the LCD. Press
after each character. To erase an entered character,
press .
Make sure that you have the right password and note
some password are case (upper case & lower case)
sensitive.
Your DesignNCut machine and PC connection must
be on the same network.
n
Press once you completed entering your
password.
o
When the message [Apply Settings?] appears on
your LCD, press
machine will connect to WLAN.
* Give your machine time to connect to your
wireless network.
p
When the message [Connected to WLAN. Press
[OK] button.] appears on your LCD, press
button on your machine.
q
The Wireless LAN Connect light will turn on.
* Give the Wireless LAN Connect light time to turn
on.
: Operation performed in DesignNCut
Manager
r
Go back to DesignNCut Manager and click
[Connect].
14
after each
When pressing
to select [Yes]. Your
s
Select the machine number and then click
[OK].
* For mobile version, tap [Done].
Note
• To check your machine's number, press
to display the [2. Machine Info] on the
machine's LCD, and then press
When [1. No.] appears on the LCD, press
Your machine's number will be displayed on the
machine's LCD.
t
When [DesignNCut connection is successful.]
appears in the dialog box, click [OK].
* For mobile version, this dialog box will not appear.

Continue the guidance instruction to register a
new account on ScanNCutCanvas.

Go to "REGISTER DesignNCut ON
ScanNCutCanvas" on page 22 to connect your
machine to ScanNCutCanvas.
Memo
• If Wireless LAN connection failed and the
following message appears:
Network Password (Key) error
(Err-04). Press [OK] button.
an incorrect network password (key) may have
been entered. Press
the procedure again starting with step
"Using Wireless Network Name (SSID) &
Network Password (Key)" on page 13.
- For details on other causes, see "ERROR
MESSAGES" on page 59.
.
.
, and then perform
i
of