Installing A Second Battery Pack (Optional) - Getac B300 User Manual

To replace the battery pack, follow these steps:
1. Make sure that the computer is not turned on or connected to AC
power.
2. Locate the battery compartment on the left side of the computer.
3. Open the compartment cover by sliding the release latch to the left
( ) then upwards ( ).
4. Pull on the ribbon strip to remove the battery pack.
5. Slide the new battery pack all the way into the slot. Make sure to
observe the correct orientation (the ribbon strip must face outward for
future battery pack removal).
6. Close the compartment cover and slide the release latch downward,
then towards the right to secure the battery pack.

Installing a Second Battery Pack (Optional)

You can install a second battery pack to your computer for a longer
operating time when AC power is not available. To install a second
battery pack:
1. Make sure that system power is off.
Managing Power 3-6