Setting Up A Client Computer - Gestetner P7032 Operating Instructions Manual

Windows NT 4.0 Configuration

Setting up a Client Computer

This section describes the procedures for setting up a client in a network that
uses Windows 2000 Server, Windows 2000 Professional, Windows NT Server or
Windows NT Workstation as a print server.
To print from Windows NT 4.0, you must install the printer driver and change
the printer port to the print server.
3
Note
❒ This section assumes that the client has already been configured to communi-
cate with a Windows 2000 or Windows NT print server. Do not begin the fol-
lowing procedure until the client has been set up and configured correctly.
Use the [Printers] window to set up the printer.
A
Click [Start], point to [Settings], and then click [Printers].
B
Double-click the [Add Printer] icon.
This launches the Add Printer Wizard.
C
Click [Network printer server], and click [Next >].
D
In the [Shared Printers] box, double-click the name of the computer used as a
print server.
The printers attached to the network are displayed.
46
Windows 2000 or
Windows NT Print Server
Windows NT 4.0