Setting Up The Printer Driver - Gestetner P7032 Operating Instructions Manual

Windows 2000 Configuration
Uninstalling PortNavi
Preparation
Before uninstalling PortNavi, make sure that:
• The port settings dialog box is closed.
• No printer is using the PortNavi port as a printer port.
2
A
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
B
Click the [Change or Remove Programs] tab, click [PortNavi], and click [Change/
Remove].
C
After a confirmation message appears, click [Yes].
UninstallShield removes all of the components of PortNavi.
D
After a confirmation message appears, click [Yes].
E
Confirm the [Remove Shared File?] dialog box.
F
When the uninstallation is complete, click [OK].

Setting Up the Printer Driver

The following procedure allows you to configure the printer port to use Port-
Navi.
Preparation
The target printer must be turned on before starting the installation process.
A
Install the printer driver of the printer you want to use.
B
From the [Printers] window, click the icon of the printer. On the [File] menu,
click [Properties].
C
Click the [Ports] tab and click [Add Port].
D
Click [PortNavi] in the [Available port types:] box, and then click [New Port].
The [Select Printer] dialog box appears and printers on the network are
browsed.
The displayed items are as follows:
Model Name: The model name of the printer.
Name: The name of Network Interface Board.
Comment: Additional information about Network Interface Board.
Address: The IP address of the printer.
22