Using Postscript; Setting Up Options; Job Type - Gestetner DSc224 Operating Instructions Manual

Setting up Options

This documentation describes the specific printer functions and menus that are
added by installing the PPD file. For more information about the functions and
menus of the Windows 95/98/Me PostScript 3 printer driver, see the printer
driver's Help.

Job Type

Use this function to select the type of print job.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/XP
Windows NT 4.0
Macintosh
You can select the following items.
❖ ❖ ❖ ❖ Normal
Select this function for normal printing. The print job starts immediately after
the print command is given.
Note
❒ Under Windows 95/98/Me, if you want to use an User ID, click the [De-
tails] button.
❖ ❖ ❖ ❖ Sample Print
Use this function to print only one set of a multiple print jobs.
The other sets are saved in the machine. The saved job can be printed from the
machine's control panel. You can also delete the saved job.
Note
❒ The "User ID" can consist of up to eight alphanumeric (a-z, A-Z, 0-9) char-
acters.
❒ Entering the "User ID" helps you to distinguish the print job from others.
Reference
For more information about how to use Sample Print, see p.2 "How to Use
Sample Print".

1. Using PostScript 3

[Job Type] on the [Setup] tab.
[Job Type] on the [Job/Log] tab in the Printing Preferences
dialog box.
[Job Type] on the [Job/Log] tab in the Printer Properties di-
alog box.
[Job Type] on [Job Log] in the print dialog box.
1