Gestetner P7032 Operating Instructions Manual page 5

Introduction
This manual contains detailed instructions on configuring the printer as a net-
work printer. Read the section appropriate to your network environment for
how to configure the printer correctly.
Windows 95/98/Me
Windows 2000
Important
❒ The procedures written in this manual assume that you are a network administrator.
If you are not, be sure to consult your network administrator before configuration.
Reference
For more information about connecting the printer to the host computer with
Network Interface Board, see the Setup Guide that comes with this printer.
For more information about configuring the Network Interface Board with
the operation panel, see the Setup Guide that comes with this printer.
❖ ❖ ❖ ❖ Features
• Support for 100BASE-TX and 10BASE-T
• The Network Interface Board is compatible with NetWare (IPX/SPX),
Windows NT (TCP/IP, NetBEUI, IPP
*1
BEUI, IPP
(TCP/IP) and Macintosh (AppleTalk) protocols. This allows you to use the
printer in a network that uses different protocols and operating systems.
• A computer used as a dedicated print server is not required because the
Network Interface Board can be configured as a NetWare print server.
• The Network Interface Board can connect the printer to the network with-
out requiring its own power supply because the Network Interface Board
is installed inside the printer.
*1
IPP (Internet Printing Protocol) is a protocol for printing via the Internet.
Windows 2000,
Windows NT (Server)
Windows NT
), Windows 95/98/Me (TCP/IP, NetBEUI, IPP
NetWare (Server)
NetWare
(Client)
Macintosh
*1
), Windows 2000 (TCP/IP, Net-
UNIX
*1
), UNIX
iii