Accessing The Port Settings Dialog Box - Gestetner P7032 Operating Instructions Manual

E
Click the model name of the printer, and then click [OK].
Note
❒ If you want to select any printer which is not shown here, click [IP Address]
and input the IP address of the printer.
F
Confirm that the PortNavi port name is shown in the [Print to the following
port(s)] box, and click [OK].
The PortNavi port name is shown as "IP address@model name".
The configuration is now complete.
When printing, select the configured printer here and print as usual. Printing
will be done automatically by PortNavi.

Accessing the Port Settings Dialog Box

This section describes how to access the port settings dialog box to configure No-
tice, Parallel Printing and Recovery Printing.
Reference
For more information about these settings, see PortNavi Help.
A
Click [Start] on the taskbar, point to [Settings], and click [Printers].
B
Click the icon of the printer you want to use. On the [File] menu, click [Prop-
erties].
C
Click the [Ports] tab and click [Configure Port].
The PortNavi settings dialog box appears.
Using PortNavi
2
23