Table of Contents
Advertisement
Windows 2000 Configuration
Limitation
❒ To use PortNavi you must install PRINTER MANAGER FOR CLIENT and
use the TCP/IP protocol. For the name of the PRINTER MANAGER FOR
CLIENT you use, see the inside the front cover of this manual.
❒ For more information about installing PRINTER MANAGER FOR CLIENT,
see the Setup Guide that comes with this printer.
2
Note
❒ If you use the Multidirect Print port for printing, the port is switched auto-
matically to the PortNavi port.
❒ Be sure to close all applications before beginning the installation process. In-
stalling PortNavi may require the computer to be restarted.
Installing PortNavi
Follow the procedure below to install PortNavi.
A
Configure the IP parameters on the Network Interface Board using the op-
eration panel.
Reference
For more information about setting IP parameters, see "Configuring the
printer for the Network with the Operation Panel" in the Setup Guide that
comes with this printer.
B
Insert the CD-ROM into the CD-ROM drive.
Note
❒ If the installer starts automatically, you can use it to install PortNavi. Fol-
low the instructions on the screen.
C
Open [Control Panel], and double-click the [Add/Remove Programs] icon.
D
Click [Add New Programs], and then click [CD or Floppy].
E
Click [Next >].
F
Type the name of the CD-ROM drive in the [Open] box, followed by
":\NETWORK\PORTNAVI\DISK1\SETUP.EXE" (do not include the
quotation marks), and then click [Finish].
Note
❒ An example would be "D:\NETWORK\PORTNAVI\DISK1\SETUP.EXE"
when the drive letter is "D".
G
From the [Choose Setup Language] list, select the language you use, and then
click [OK].
20
Advertisement
Table of Contents
