Internet Printing Protocol (Ipp) Printing; Setting Up A Printer Using Ipp; Setting Up The Ipp Functions Of The Printer - Gestetner 1502 Owner's Manual

Choose an exiting option and press Enter.
2.

7.8 Internet Printing Protocol (IPP) Printing

7.8.1 Setting Up a Printer Using IPP

You can use the IPP with Windows 2000.
To set up a printer for IPP printing:
1. Assign an IP address to your print server.
Reset the print server.
2.
Use the
3.

7.8.2 Setting Up the IPP Functions of the Printer

You can set up the IPP functions of the printer by using MAP or a Web browser. For IPP
printing, your workstation must have an IPP client installed (either from Microsoft or a
third-party).
To configure the printer for printing:
Choose Start -> Settings -> Printers.
1.
Click Add Printer.
2.
The Add Printer wizard appears. Click Next to proceed.
Choose the Network Printer option and click Next.
3.
On the Locate Your Printer screen, select Connect to a printer on the Internet
4.
or on your intranet and type the correct printer path. (case sensitive)
The format is:
where ip-addr is the IP address of the printer. For example:
Your printer port number is listed on the NIB Status Page next to the Internet Printing
Note:
Protocol.
Click Next and finish printer setup.
5.
For example, select the appropriate printer type.
Perform a Test Print from your printer and check the printer for the test page.
6.
TCP/IP Configuration
command to make sure the print server responds.
ping
URL: http:// ip-addr :631/Print
URL: http://199.92.186.97:631/Print
7.8 Internet Printing Protocol (IPP) Printing
7-17