Installing The Pcl Printer Driver; Installing The Pcl 6 Printer Driver - Gestetner DSm416 Operating Instructions Manual

1. Installing the PCL Printer

Installing the PCL 6 Printer Driver

This section describes how to install PCL 6 printer driver.
If you want to use the PCL 5e printer driver, you must download it from the sup-
plier's Web site.
TCP/IP requires the following:
• This machine must be connected to the network through the network inter-
face cable.
• This machine must be turned on.
• The TCP/IP protocol must be configured.
• An IP address must be allocated to this machine and to the computer.
Important
❒ If you install the Printer Enhance Option, the DDST printer driver is disabled.
❒ When the DDST printer driver disabled, it cannot be used even if you remove
the Printer Enhance Option.
❒ If your system is Windows 2000/XP, or Windows Server 2003, installing a
printer driver by Auto Run requires Administrators permission. When you
install a printer driver by Auto Run, log on using an account that has Admin-
istrators permission.
❒ When updating the printer driver by installing the latest version, you should
uninstall that of former version if any.
❒ Some applications may require installation of the PCL 5e printer driver. In
this case, you can install PCL 5e without having to install PCL 6.
Auto Run starts the installer automatically when you load the CD-ROM in the
CD-ROM drive.
If you want to cancel Auto Run, hold down the {Shift} key (when your system is
Windows 2000, hold down the left {Shift} key) while inserting the CD-ROM.
Keep the {Shift} key held down until the computer has finished accessing the
CD-ROM.
A
Close all applications that are running.
B
Insert the CD-ROM into the CD-ROM drive.
Auto Run will start the installer.
C
Select a language to change the interface language, and then click [OK].
D
Select [PCL 6 Printer Driver].
Driver
3