Gestetner DSm725e Network Manual page 97

Messages
Full: Internal Tray 2
Full: Waste Toner
Hex Dump Mode
Immed. Trans. not connected
Immediate Transmission Failed
In Use: Copier
In Use: Fax
In Use: Finisher
In Use: Input Tray
In Use: Staple Unit
Independent-supplier Toner
Key Card not inserted
Key Card/Counter not inserted
Key Counter not inserted
Loading Toner...
Low: Black Toner
Low: Toner
Malfunction: Booklet Processor
Malfunction: Duplex Unit
Malfunction: Ext. Charge Unit
Malfunction: Finisher
Malfunction: Interposer
Malfunction: Output Tray
Malfunction: Staple Unit
Malfunction: Tray 1
Malfunction: Tray 2
Malfunction: Tray 3
Malfunction: Tray 3 (LCT)
Malfunction: Tray 4
Memory Low: Copy
Memory Low: Data Storage
Getting Printer Information over the Network
Description
Internal tray 2 is full.
Waste toner is full.
It is a hex dump mode.
It did not connect directly with the other party of the
transmission.
An error has occurred while transmitting directly.
The copier is being used.
The fax is being used.
Other functions is using Finisher.
Other functions is using the input tray.
Other functions is using the staple unit.
Toner that is not recommended is set.
The machine is waiting for key card to be inserted.
The machine is waiting for key card or key counter to
be inserted.
The machine is waiting for key counter to be left in it.
Toner is being supplied.
The black toner cartridge is not set correctly, or toner
is almost running out.
The toner cartridge is not set correctly, or toner is al-
most running out.
There is a problem with booklet finisher.
There is a problem with the duplex unit.
There is a problem with the external charge unit.
There is a problem with the finisher.
There is a problem with the interposer.
There is a problem with the output tray.
There is a problem with the staple unit.
There is a problem with tray 1.
There is a problem with tray 2.
There is a problem with tray 3.
There is a problem with tray 3 (LCT).
There is a problem with tray 4.
Memory shortage has occurred while the copy was
operating.
Memory shortage has occurred while the document
was being accumulated.
2
89