Gestetner DSm725e Network Manual page 114

Monitoring and Configuring the Printer
Message
The print server received error <error
number> during attempt to log in to the net-
work. Access to the network was denied. Ver-
ify that the print server name and password
are correct.
too many pictures.
2
trap account is unavailable.
usbd is disable.
WINS name registration: No response to serv-
er<WINS server address>
WINS wrong scopeID=<Scope ID>
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
106
Problem and solutions
Login to the file server failed. The print server
is not registered or a password is specified.
Register the print server without specifying a
password.
PictBridge printing failed because too many
image are sent during one print transaction.
Reduce images at one print transaction.
v3Trap cannot be sent. This could be because
the Trap destination account is different from
the account specified by the printer.
Plug and Play function and printing is disa-
bled because usbd is disabled in the security
mode.
Enable usbd in the security mode.
There was no response from the WINS server.
Check the correct WINS server address is en-
tered. Alternatively, check the WINS server is
functioning properly.
An invalid scope ID was used. Use a valid
scope ID.