Limitations - Gestetner DSm725e Network Manual

Appendix

Limitations

The following limitations apply to the Windows Terminal Service environment.
These limitations are built in Windows Terminal Service or MetaFrame.
❖ Windows Terminal Service
In the Windows Terminal Service environment, some of the printer driver's
functions is unavailable. In an environment where Windows Terminal Serv-
ice is installed, some of the printer driver's functions is unavailable, even if
any function of Windows Terminal Service is not used. When you install
SmartDeviceMonitor for Client in an environment where the Terminal Serv-
ice is running on a Windows NT Server 4.0 Terminal Server Edition or the
Windows 2000 Server family computer, be sure to install it using the install
4 mode. The following are the two methods of installation using the install
mode:
A
Use [Add/Remove Programs] in [Control Panel] to install SmartDeviceMonitor
for Client.
B Enter the following command in the MS-DOS command prompt:
To quit the install mode, enter the following command in the MS-DOS com-
mand prompt.
❖ MetaFrame's [Auto-creating client printers]
Using [Auto-creating client printers] can select a logical printer created by copy-
ing the client's local printer data to the MetaFrame server. We strongly recom-
mend testing this function in your network environment before using it for
your work.
• The settings for optional equipment will not be stored in the server after
the equipment is disconnected. The settings for optional equipment will be
restored to its defaults each time the client computer logs on to the server.
• When printing a large number of bitmap images or using the server in a
WAN environment over dial-up lines such as ISDN, printing may not be
possible or errors may occur, depending on data transfer rates.
• When using MetaFrame XP 1.0 or higher versions, we recommend making
settings in [Client Printer bandwidth] under [Citrix Management Console] accord-
ing to the environment.
• If a print error occurs on the server and the print job or a printer created in
[Auto-creating client printers] cannot be deleted, we recommend the follow-
ing:
• MetaFrame 1.8 SP3, MetaFrame XP 1.0 SP1/FR1
Make settings in [Delete unfinished print jobs] in the registry. For details,
see the Readme file provided with MetaFrame.
• MetaFrame XP 1.0 FR2
Make settings in [Delete pending print jobs at logout] under [Printer Proper-
ties Management] of Citrix Management Console.
112