Small Children - NetComm NTC-223 Quick Start Manual

NTC-223 4G LTE Cat 1 Industrial IoT Router
Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.
Do not paint your device or its accessories.
Do not attempt to disassemble your device or its accessories, only authorised personnel must
do so.
Do not expose your device or its accessories to extreme temperatures. Ensure that the device is
installed in an area where the temperature is within the supported operating temperature range of
-30°C to +70°C.
Do not use your device in an enclosed environment or where heat dissipation is poor. Prolonged
use in such space may cause excessive heat and raise ambient temperature, which will lead to
automatic shutdown of your device or the disconnection of the mobile network connection for
your safety. To use your device normally again after such shutdown, cool it in a well-ventilated
place before turning it on.
Please check local regulations for disposal of electronic products.
Do not operate the device where ventilation is restricted
Installation and configuration should be performed by trained personnel only.
Do not use or install this product near water to avoid fire or shock hazard. Avoid exposing the
equipment to rain or damp areas.
Arrange power and Ethernet cables in a manner such that they are not likely to be stepped on or
have items placed on them.
Ensure that the voltage and rated current of the power source match the requirements of the
device. Do not connect the device to an inappropriate power source.

Small Children

Do not leave your device and its accessories within the reach of small children or allow them to
play with it.
They could hurt themselves or others, or could accidentally damage the device.
Your device contains small parts with sharp edges that may cause an injury or which could
become detached and create a choking hazard.
Demagnetisation
To avoid the risk of demagnetisation, do not allow electronic devices or magnetic media close to
your device for a long time.
Avoid other magnetic sources as these may cause the internal magnetometer or other sensors
to malfunction and provide incorrect data.
19