Transport And Storage; Installation; Maintenance - Beko CLEARPOINT 3eco S040 Original Installation And Operating Manual

CLEARPOINT ® 3eco coalescing filter

2.1.4 Transport and storage

Improper transport or storage can lead to personal injury or damage to property.
For safe transport and storage of the product and accessories, observe the following points:
• Use personal protective equipment for all work with packaging material.
• Handle the packaging of the product and the accessories with care.
• Transport and handle the packaged product and accessories according to the labeling on the packaging (observe
attachment points for hoists, center of gravity and orientation such as holding vertically, do not throw, etc.).
• Use proper, functional transportation equipment and hoists.
• Observe permitted transportation and storage parameters.
• Do not store the product and accessories exposed to direct sunlight and heat sources.

2.1.5 Installation

Improper assembly or electrical installation of the product and accessories can result in personal injury and damage to
property, as well as impairment of operation.
For safe assembly and electrical installation, observe the following points:
• Mount the product, the accessories, all parts and materials used free of mechanical tension.
• Check all plug connections for correct seating.
• Avoid the risk of tripping by using appropriate cable and hose guides.
• Avoid mechanical stress on the cables.
• Fasten and fix all hoses in such a way that they cannot make any percussive movements.
• Securely pipe the inlet and outlet lines.

2.1.6 Maintenance

Improper performance of maintenance and repair work can result in serious injury or death.
Please observe the following points for safe maintenance and repair:
• Use suitable protective equipment for all maintenance and repair work on the product or accessories.
• Establish a safe area around the work area for all maintenance and repair work.
• Before starting work, bleed the pressurized product and accessories and secure them against unintentional
pressurization.
• Before starting work, disconnect the product and accessories from the power supply and secure them against
unintentional reconnection (log out, tag out).
• Only use materials permitted for the specific purpose and suitable tools in proper condition.
• Only use cleaned pipes and hoses that are free of dirt and corrosion.
• Do not use abrasive or aggressive cleaning agents or solvents that could damage the external coating (e.g. labels,
type plate, corrosion protection, etc.).
• Do not clean or operate the device with hard or pointed implements.
• Use an antistatic, damp cloth for external cleaning.
• Observe the local hygiene regulations.
• Ensure order and cleanliness during maintenance and repair work. Prevent impurities from penetrating into the
opened product or accessories. Store the dismantled components and accessories directly in a safe place.
• After completion of the maintenance and repair work, remove all tools, cleaning media and parts no longer required
from the work location.
• Dispose of the product and accessories only after they have been cleaned and freed of any media residue.
• All components and assemblies, operating and auxiliary materials and cleaning agents must be disposed of
appropriately and according to regional statutory specifications and provisions.
• Dispose of electrical and electronic components via a specialist disposal company.
12 | 60
Installation and operation instructions