Sender/Receiver Panel Layout - Gefen VGA-141SRN User Manual

SENDER/RECEIVER PANEL LAYOUT

Sender Unit
5V DC
Power Input
Link Light Power Light
VGA Out
Receiver Unit
Link Light Power Light
VGA In
Brightness
Focus
Trim Pot
Trim Pot
The link light will stay on when a VGA connection is made with the source and the
sender unit. If the link light turns off verify that the VGA cable is connected properly
from the source to the sender unit and the display to the receiver unit. The receiver
end link light will stay on as long as a CAT-5e cable is connected between the send-
er and receiver unit
The power light will stay on as long as the power supply is connected to the sender
unit.
4