[Auto Setup Setting]; [Signal Search]; [Back Color]; [Wide Mode] - Panasonic PT-VW340 Series Operating Instructions (Functional Manual)

[AUTO SETUP SETTING]

Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the
remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press as to select [AUTO SETUP SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[BUTTON]

[SIGNAL SEARCH]

When the power is turned on, this function automatically detects the terminal which signals are input and sets the function to
switch.
1) Press as to select [SIGNAL SEARCH].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f If the [SIGNAL SEARCH] is set to [ON] when there is no signal input, press the <AUTO SETUP> button on the remote
control, this function automatically detects the terminal to which signals are input and then switches.

[BACK COLOR]

Set the display of the projected screen when there is no signal input.
1) Press as to select [BACK COLOR].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[BLUE]
[BLACK]
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO]
Note
f To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.
f If you do not register the image of the [USER LOGO], the projected image will be displayed in black even if the [BACK
COLOR] is set to [USER LOGO].

[WIDE MODE]

Using this function when displays the incorrect signals input.
1) Press as to select [WIDE MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[OFF]
[ON]

[SXGA MODE]

This function is used if the whole projected image is not displayed when SXGA signal is input. Set it to [SXGA] normally.
1) Press as to select [SXGA MODE].
2) Press qw to switch the item.
Chapter 4 Settings - [DISPLAY OPTION] menu
Enables the auto setup function when switching signals.
Enables the auto setup function only when the <AUTO SETUP> button is pressed.
Enables input detection automatically.
Disables input detection automatically.
Displays the entire projection area in blue.
Displays the entire projection area in black.
Displays the image registered by the user.
Displays by judging the signal automatically. Set to this mode normally.
When input the 4:3 signal.
When input the wide signal.
ENGLISH - 71