Panasonic PT-VW340 Series Operating Instructions (Functional Manual) page 100

Wireless LAN (M-DIRECT)
1 [IP ADDRESS]
Enter the IP address.
2 [SUBNET MASK]
Enter the subnet mask.
3 [SSID]
Set the SSID to be used in M-DIRECT.
4 [CHANNEL]
Set the channel to be used in M-DIRECT.
Wireless LAN (USER 1~USER 3)
1 [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
2 [IP ADDRESS]
Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]
Enter the default gateway address when not using a
DHCP server.
5 [DNS1]/[DNS2]
Enter the preferred DNS/alternate DNS server when not
using a DHCP server.
6 [SSID]
Enter the same character string that are registered in
the access point.
Note
f The screen items will change according to the authentication method of wireless LAN which is connected.
100 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
5 [KEY]
Set the key to be used in M-DIRECT.
Input either 8 to 63 alphanumerics or a 64 digit string in the
hexadecimal format.
6 [Back]/[Next]
Click the [Back] button to return to the original screen.
The current settings are displayed by pressing the [Next]
button.
Click the [Submit] button to update the settings.
1
2
3
4
5
6
7
7 [Back]/[Next]
Click the [Back] button to return to the original screen.
The current settings are displayed by pressing the [Next]
button.
Click the [Submit] button to update the settings.
8 [AUTHENTICATION]
Set the user authentication method used by the network to
be connected.
9 [EAP]
Select the EAP setup in the RADIUS server.
10 [ENCRYPTION]
Select the encryption method to be used for
communication between the projector and the network.
1
2
3
4
5
6
8
9
7
10
7