[Auto Setup Setting]; [Signal Search]; [Startup Input Select]; [Back Color] - Panasonic PT-FX500 Operating Instructions Manual

[AUTO SETUP SETTING]

Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP>
button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press as to select [AUTO SETUP SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.

[AUTO]

[BUTTON]

[SIGNAL SEARCH]

When the power is turned on, this function automatically detects the terminal which signals are input and sets the
function to switch.
1) Press as to select [SIGNAL SEARCH].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f If the [SIGNAL SEARCH] is set to [ON] when there is no signal input, press the <AUTO SETUP> button, this function automatically detects
the terminal to which signals are input and then switches.

[STARTUP INPUT SELECT]

Set the input when the projector is switched on to start projection.
1) Press as to select [STARTUP INPUT SELECT].
2) Press the <ENTER> button.
f The [STARTUP INPUT SELECT] screen is displayed.
3) Press as to select an item.
f The items will switch each time you press the button.

[LAST USED]

[NETWORK]
[COMPUTER1]
[COMPUTER2]
[HDMI1]
[HDMI2]
[VIDEO]
[DIGITAL LINK]
[INPUT1] -
[INPUT10]
*1
*1 When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its input name is
automatically reflected from [INPUT1] to [INPUT10]. If an item where the input name is not reflected is selected, it is disabled.
Note
f When [SIGNAL SEARCH] is set to [ON], the [STARTUP INPUT SELECT] cannot be set.

[BACK COLOR]

Set the display of the projected screen when there is no signal input.
1) Press as to select [BACK COLOR].
2) Press qw to switch the item.
Chapter 4 Settings — [DISPLAY OPTION] menu
Enables the auto setup function when switching signals.
Enables the auto setup function only when the <AUTO SETUP> button is pressed.
Enables input detection automatically.
Disables input detection automatically.
Keeps the input selected last.
Sets the input to NETWORK.
Sets the input to COMPUTER1.
Sets the input to COMPUTER2.
Sets the input to HDMI1.
Sets the input to HDMI2.
Sets the input to VIDEO.
Sets the input to DIGITAL LINK.
Sets the input to DIGITAL LINK, and switches the input of Panasonic twisted-pair-cable transmitter to the
specified input.
ENGLISH - 83