Setting Up; Installation Mode; Parts For Ceiling Mount (Optional) - Panasonic PT-VW340 Series Operating Instructions (Functional Manual)

Setting up

Installation mode

There are four ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 75)
depending on the installation location.
Mounting on the ceiling and projecting forward
Menu item
[PROJECTION METHOD]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]

Parts for ceiling mount (Optional)

You can install the projector on the ceiling by using the optional ceiling mount bracket (ET-PKV100H: for high ceiling,
ET-PKV100S: for low ceiling), and the optional projector mount bracket ET-PKV101B.
f Use only the ceiling mount brackets specified for this projector.
f Refer to the Installation Instructions for the ceiling mount bracket when you install the bracket and the projector.
Attention
f To ensure projector performance and security, installation of the ceiling mount bracket must be carried by your dealer or a
qualified technician.
Chapter 2 Getting Started - Setting up
Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Method
[FRONT/CEILING]
Setting on a desk/floor and projecting forward
Method
[REAR/CEILING]
Menu item
[PROJECTION METHOD]
Menu item
[PROJECTION METHOD]
Method
[REAR/DESK]
Method
[FRONT/DESK]
ENGLISH - 31