Off - Panasonic PT-VW340 Series Operating Instructions (Functional Manual)

Note
f The authentication method is WPA2-PSK, and the encryption method is AES. Both methods are fixed.
f When you need to change initial configuration of [M-DIRECT], please contact your network administrator.
f The initial setting is [KEY], there is a risk that the leakage of information by a third party. Change the initial setting is
necessary.
f As the DHCP server is already functioning, select [ON] before connecting a computer.
f It is possible to send the images which are stored in iPad / iPhone / iPod touch and Android devices to the projector by
using the dedicated application and project. For more information on how to use the application software, refer to the
application guide described in the following URL.
[iOS support site] http://panasonic.net/avc/projector/ios/
[Android support site] http://panasonic.net/avc/projector/android/
Detailed setup of [USER1]/[USER2]/[USER3]
1) Press the <ENTER> button when [USER1], [USER2] or [USER3] is selected.
f The [WIRELESS DETAILED SETUP 1/2] screen is displayed.
2) Press as to select an item, and press qw to change the setting according to the instructions.
[NAME CHANGE]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
Note
f Before using the DHCP server, make sure the DHCP server is already functioning.
f For details of IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY and DNS server, ask the network administrator.
f A wired LAN and wireless LAN cannot be used in the same segment.
3) Press s.
f The [WIRELESS DETAILED SETUP 2/2] screen is displayed.
4) Press as to select the item and press asqw to change the setting according to the instructions.
[SSID]
[AUTHENTICATION]
[ENCRYPTION]
r [AUTHENTICATION] setting
[OPEN]
[SHARED]
[WPA-PSK ]
[WPA2-PSK ]
[WPA-EAP/WPA2-EAP ]
[WPA-EAP]
[WPA2-EAP]
Chapter 4 Settings - [NETWORK/USB] menu
[IP ADDRESS]
[SUBNET MASK]
[SSID]
[CHANNEL]
[KEY]
You can change the projector name.
ON: If a DHCP server exists in the network to which the projector is connected, the
IP address will automatically be acquired.

OFF:

If a DHCP server does not exist in the network to which the projector is
connected, additionally set [IP ADDRESS], [SUBNET MASK ] and [DEFAULT
GATEWAY].
Enter the IP address if DHCP server is not used.
Enter the subnet mask if DHCP server is not used.
Enter the gateway address if DHCP server is not used.
Enter the DNS server address if DHCP server is not used.
Enter the alternate DNS server address if DHCP server is not used.
Enter the same character string that is registered in the access point.
Set the user authentication method used by the network to be connected.
Select the encryption method to be used for communication between the projector
and the network.
Select when the access point authentication method is Open System.
Select when the access point authentication method is Shared Key.
Select when the access point authentication method is WPA-PSK.
Select when the access point authentication method is WPA2-PSK.
Select when the access point authentication method is WPA-EAP/WPA2-EAP.
Select when the access point authentication method is WPA-EAP.
Select when the access point authentication method is WPA2-EAP.
192.168.12.100
255.255.255.0
M-DIRECT + The last 4 digits of
the network ID
1
The same string as the SSID
ENGLISH - 87