Panasonic PT-VW340 Series Operating Instructions (Functional Manual) page 97

Error information page
When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to
display the error/warning details.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
1 Self-diagnosis result display
Displays the item check results.
[OK]: Indicates that operation is normal.
r [FAILED] items displayed when a problem occurs
Parameter
[FAN]
[FAN(INTAKE)]
[FAN(EXHAUST)]
[FAN(LAMP)]
[INTAKE AIR TEMPERATURE]
[EXHAUST AIR TEMPERATURE]
[OPTICS MODULE TEMPERATURE]
[LAMP REMAIN TIME]
[LAMP STATUS]
[APERTURE (CONTRAST-SHUT-
TER)]
[AIR FILTER]
Chapter 4 Settings - [NETWORK/USB] menu
Trouble has occurred in the fan or its drive circuit. Consult your dealer.
Trouble has occurred in the intake fan.
Trouble has occurred in the exhaust fan.
Trouble has occurred in the lamp cooling fan.
The air intake temperature is too high. The projector may be used in an operating
environment where the temperature is high, such as near a heating appliance.
The exhaust air temperature is high. The air exhaust port may be blocked.
The temperature around the optics module inside the projector is high. The projec-
tor may be used in an operating environment where the temperature is high, such
as near a heating appliance.
The lamp runtime has exceeded the prescribed cumulative time, and it is now time
to replace the lamp.
The lamp has failed to light.
Wait a short while for the lamp to cool off, and then turn on the power.
Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
There is too much dust accumulated in the air filter unit. Turning off the projector
and clean the air filter unit.
[FAILED]: Indicates that there is a problem.
[WARNING]: Indicates that there is a warning.
Description
1
ENGLISH - 97