[Auto Setup Setting]; [Signal Search]; [Back Color]; [P-Timer] - Panasonic SOLID SHINE PT-VMZ51 Operating Instructions Manual

4) Press qw to switch the item.
[OFF]
[ON]

[AUTO SETUP SETTING]

Set the automatic execution of AUTO SETUP.
Dot clock, clock phase and image position can be adjusted automatically without pressing the <AUTO SETUP>
button each time when unregistered signals are input frequently at meetings, etc.
1) Press as to select [AUTO SETUP SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.

[AUTO]

[BUTTON]

[SIGNAL SEARCH]

Set to enable/disable the signal search function.
If the signal search function is enabled, the input with input signal is automatically selected when the power is
turned on and the projection is started. In addition, if the <AUTO SETUP> button is pressed when the currently
selected input has no signal, it automatically switches to the input with input signal.
1) Press as to select [SIGNAL SEARCH].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]

[BACK COLOR]

Set the display of the projected screen when there is no signal input.
1) Press as to select [BACK COLOR].
2) Press qw to switch the item.
f The items will switch each time you press the button.

[BLUE]

[BLACK]
[DEFAULT LOGO]
[USER LOGO]
Note
f To create/register the [USER LOGO] image, use "Logo Transfer Software". The software can be downloaded from the Website (https://
panasonic.net/cns/projector/).
When transferring logos via the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G), setting for "NO
SIGNAL SLEEP" of the DIGITAL LINK output supported device should be set to "OFF" to avoid interruption of communication.

[P-TIMER]

Set and operate the presentation timer function.
Setting the mode
1) Press as to select [P-TIMER].
2) Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
3) Press as to select [MODE].
Chapter 4 Settings - [DISPLAY OPTION] menu
Starts projection with the shutter function disabled (shutter: open) when the power is turned on.
Starts projection with the shutter function enabled (shutter: closed) when the power is turned on.
If the image being projected changes to an unregistered signal, the auto setup is automatically performed.
Enables the auto setup function only when the <AUTO SETUP> button is pressed.
Enables the input detection function.
Disables the input detection function.
Displays the entire projection area in blue.
Displays the entire projection area in black.
Displays the Panasonic logo.
Displays the image registered by the user.
ENGLISH - 85