NEC NP-PA703UL User Manual page 122

5. Using On-Screen Menu
PC TOOL
Recall the geometric correction data that is registered in the projector beforehand.
Three types of correction data can be registered.
NOTE:
• As electrical correction is carried out in geometric correction, the brightness may be affected and the picture quality may be
degraded.
RESET
Reset the adjustment value that has been set up as MODE in GEOMETRIC CORRECTION (return to the initial value).
• This is ineffective when MODE is set OFF.
• Reset can be executed by pressing and holding the Geometeric. button on the remote control for over 2 seconds.
105