Connecting Hdmi Input - NEC NP-PA703UL User Manual

Connecting HDMI Input

You can connect the HDMI output of your Blu-ray player, hard disk player, or notebook type PC to the HDMI 1 IN or
HDMI 2 IN connector of your projector.
HDMI cable (not supplied)
Use High Speed HDMI Cable.
®
Input connector
HDMI 1 IN
HDMI 2 IN
TIP: For users of audio video equipment with an HDMI connector:
Select "Enhanced" rather than "Normal" if HDMI output is switchable between "Enhanced" and "Normal".
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
• When connecting the HDMI 1 IN or HDMI 2 IN connector of the projector to the Blu-ray player, the projector's video
level can be made settings in accordance with the Blu-ray player's video level. In the menu select [ADJUST] →
[VIDEO] → [VIDEO LEVEL] and make necessary settings.
• If the HDMI input's sound is not output, check if [HDMI1] and [HDMI2] are set [HDMI1] and [HDMI2] correctly the
on-screen menu [SETUP] → [SOURCE OPTIONS] → [AUDIO SELECT]. (→ page 128)
HDMI 1 IN
INPUT button on the projector
cabinet
1:HDMI 1
2:HDMI 2
145
6. Connecting to Other Equipment
HDMI 2 IN
AUDIO OUT
Button on the remote control
1/HDMI 1
2/HDMI 2
Audio cable (not supplied)