❷ Displaying Two Pictures At The Same Time - NEC NP-PA703UL User Manual

❷ Displaying Two Pictures at the Same Time
The projector has a feature that allows you to view two different signals simultaneously. You have two modes: PIP
mode and PICTURE BY PICTURE mode.
The projection video in the first screen display is known as the main display while the projection video that is called
out subsequently is known as the sub-display.
Select the projection function under [DISPLAY] → [PIP/PICTURE BY PICTURE] → [MODE] in the on-screen menu
(the default factory setting when shipped is PIP). (→ page 99)
• A single screen is projected when power is turned on.
Picture in Picture function
A small sub-display is displayed inside the main display.
The sub-display can be set up and adjusted as follows. (→ page 99)
• Select whether to display the sub-display at the top right, top left, bottom right
or bottom left of the screen (the size of the sub-display can be selected and
the position can be fine-tuned)
• Switch the main display with the sub-display
Picture by picture function
Display the main display and sub-display side by side.
The main display and sub-display can be set up and adjusted as follows. (→
page 100)
• Selecting the display boundary (ratio) of the main display and sub-display
• Switch the main display and sub-display
Input terminals that can be used for the main screen and sub-screen.
The main screen and sub-screen can provide the following input terminals.
• The main display and sub-display support computer signals up to WUXGA@60HzRB.
HDMI1
HDMI2
Main Display DisplayPort
COMPUTER
HDBaseT
NOTE:
• Some signals may not appear depending on the resolution.
Sub-Display or additional display
HDMI1 HDMI2
No Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
64
4. Multi-Screen Projection
Main Display
DisplayPort COMPUTER
Yes Yes
Yes Yes
No Yes
Yes No
Yes Yes
Main Display
Sub-Display
Sub-Display
HDBaseT
Yes
Yes
Yes
Yes
No