Do not perform steps 1 and 2 in the reverse order. This
may reduce the mounting strength.
After you finish these steps, make sure the E3NW-ECT is securely in place.
4-1-2
Removal Method
Use the following procedure to remove the Units.
1. Slide the Sensor Amplifier Units away and remove the Sensor Communication Unit first.
2. Keep the Sensor Communication Unit pressed against the DIN Track as you lift it up, and then off.
E3NW-ECT EtherCAT Digital Sensor Communication Unit Operation Manual (E429)
4 Installation and Wiring
Perform step 1 and
Do not perform step
then step 2.
2 before step 1.
4
4 - 3