Digital Audio Extender U S E R M A N U A L www.gefen.com...
Page 2
Chatsworth, CA 91311 support@gefen.com www.gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. The Digital Audio Extender is a trademark of Gefen Inc.
Thank you for purchasing the new ex•tend•it Digital Audio Extender series. Extends S/PDIF and TOSLINK digital audio devices up to 60 meters (200 feet). Place your digital audio components anywhere you want with Gefen’s Digital Audio Extender. It supports either S/PDIF or TOSLINK digital audio signals, which commonly used to transmit stereo and multichannel (7.1, DTS, Dolby Digital, etc.) digital audio.
BOX CONTENTS The Digital Audio Extender system consists of: (1) Digital Audio Extender (1) 5 VDC power supply (1) TOSLINK Cable (6 FT M-M) (1) User Manual OPERATION NOTES READ THESE NOTES BEFORE IN STALL ING OR OPERATING THE DIGITAL AUDIO EXTENDER SYSTEM * Industry standard Category-5 (CAT-5) cables are used to link the Digital Audio Extender sender and receiver boxes together.
HOW TO CONNECT THE DIGITAL AUDIO EXTENDER How to Connect the Digital Audio Extender 1- Connect your digital audio source device with either TOSLINK or S/PDIF to the Digital Audio Extender sender unit. 2- Connect the CAT5 cable from the send unit to the receive unit. 3- Connect your digital audio receiver or digital audio speaker to the Digital Audio Ex- tender receiver unit with TOSLINK or S/PDIF.
If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...
Need help?
Do you have a question about the DIGAUD-141 and is the answer not in the manual?
Questions and answers